Hover image to zoom
Fluke 789
789 Process Meter

No reviewsBe the first to review this product

Quantity
in stock? stock message

The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it’s even better, the range is extended with the new Fluke 789 – the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less. Each 789 can be supplied with a CPS calibration certificate which gives you piece of mind that the calibrations you are doing are correct. For more information on the 789 please click through to the Fluke web site, there is an extensive range of accessories for your 789, all to make your job easier.

Product code: Fluke 789

SPECIFICATIONS         
         
CURRENT MEASUREMENTS    Range    0-1 A AC or DC 
    Resolution    1 mA 
    Accuracy    0.2% + 2 LSD (DC) 
         
    Range    0-30 mA 
    Resolution    0.001 mA 
    Accuracy    0.05% + 2 LSD 
         
CURRENT SOURCING    Range    0-20 mA or 4-20 mA 
    Resolution    0-05% of span 
    Drive Capability    24 V Compliance or 1200 Ω  @ 20 mA
         
FREQUENCY    to 19,999 kHz, 0.005% + 1 LSD     
         
CONTINUITY    Beeps for resistance less than 100 Ω     
         
VOLTAGE MEASUREMENT    Range    0-1000 V AC (true-rms) or DC 
    Resolution    0.1 mV to 1.0 V 
    Accuracy    0.1% Rdg + 1 LSD (VDC) 
         
RESISTANCE MEASUREMENT    to 40 MΩ, 0.2% + 1 LSD     
         
DIODE TEST    2.0 V shows diode voltage drop     
         
DISPLAY CURRENT AND 1% OF SPAN    Yes     
         
AUTO STEP, AUTO RAMP    Yes     
 
 
FOR FULL SPECIFICATIONS REFER TO MANUFACTURERS DATA SHEET
 
  
 
 
Accessories