Q4000 Series
100mm Brass Stainless Gauge

No reviewsBe the first to review this product

Quantity
in stock? stock message
The Q4000 Series gauge is very similar to our P4000 gauge, but has brass internals. This gauge has a stainless steel case and can be liquid filled. It is a very popular pressure gauge and is suitable for most conditions and all applications where you need a low cost but long-life 100mm gauge.

The gauge is standard with bar/PSI and ½ NPT thread.

The Q4000 Series is the ideal gauge for pumps, filters, air compressors, boilers, or any industry where you need a bigger gauge that can be adjusted and calibrated if required. They can be supplied with a calibration certificate if required.

We only stock these in bottom entry but can order in rear entry for that special project or equipment.

Please click on the options available tab above to see the ranges we hold in stock, if you can't see the range you require please contact us.


Product code: Q4000 Series

The Q4000 series is a popular gauge for us we have many options available.

We only stock in bottom entry -1 to 60 bar and 0-700 bar, if you need rear entry or higher pressures we suggest using our P4000 series gauges.

Gauge has a Stainless Steel case with brass internals.
This gauge is fully repairable and adjustable and can even be supplied with a calibration certificate

Standard ranges are bar/PSI but since these take the same dial as our P4000 we can do other units and ranges for $15.00 extra.

Standard thread is ½ NPT which will fit ½ BSP fittings.

Back flange. Used for mounting the gauge to the wall.

Can supply the gauge with a red mark or even a Glass lens.

Gauge comes dry as standard but can be liquid filled for no extra cost.