Hover image to zoom
350 bar Hydraulic Hand Pump

No reviewsBe the first to review this product

in stock? stock message
The XHGV Hydraulic Pump is an easy to use hand pump suitable for pressures up to 350 bar. Externals are the same as the HPGV pump but internally the piston is of smaller diameter, which allows the pump to reach those higher pressures.

Again like the HPGV pump they are supplied with an accurate, fine adjust, zero leak bleed valve. Water, oil or alcohol can be used as the transfer medium. By using a fluid, higher pressures can be reached quickly.

Combined with the range of Ralston test hoses and fittings this is the pump to use for pressures above 200 bar.

By combining the Crystal XP2i digital test gauge and this pump you can test gauges from 10 to 350 bar. The integral swivel fitting allows you to turn the XP2i to any position and also allows you to change the XP2i as required or send it to CPS for Calibration. Each pump comes complete with a 3 foot Ralston quick test hose.

Product code: XHGV

Hand Pump   XHGV Assembly
Gauge Adaptor   1/4" Female NPT swivel, brass (SWIV-2FBW)
Hose     Quick-test hose, brass hose ends, 3ft (92cm) long (QTQT-HOS- 3ft)
Hose Adaptor    1/4" Male NPT x Male QT, no check-valve, brass (QTHA-2MBO)  
Pressure Range    0 to 5000 PSI / 0 to 345 bar 
Media   Ralston Calibration Oil, mineral based oil, water 
Outlet Port   Male Quick-test with cap and chain, brass 
Temperature Range    -18 to 54º 
Construction   Anodized Aluminum, Brass, Plated Steel, Stainless Steel 
Seal Materials    Buna-N, Delrin, Synthetic Cork, Teflon 
Fine Adjust Resolution    ±1.00 PSI / 6.9 kPa 
Liquid Reservoir   Polycarbonate Liquid reservoir and (2) gaskets 
Weight    1.1 kg 
Dimensions    H: 24.9428cm x W: 12.065cm x D: 12.065cm