Hover image to zoom
Greisinger GMH 2700

No reviewsBe the first to review this product

Quantity
in stock? stock message
If you want a robust but accurate thermometer to take temperature measurements, then look no further than the Greisinger 2700 series.
The 2700 series is a robust water proof thermometer, with a selection of 2 wire PT 1000 probes to choose from. Each ensuring you are taking good measurements. Each probe is permanently connected to the thermometer either directly or at the end of a 1 meter cable.

The 2700 series has an extremely long battery life with in excess of 6000 hours from 2 x AAA batteries. Just like all the other Greisinger thermometers the 2700 series can be supplied with its very own CPS 5 point IANZ endorsed calibration certificate so you know that the measurements you are taking are correct.

This thermometer is very much the thermometer for taking measurements inside your plant or out in the field . The impact resistant ABS case will handle those drops and knocks. Each thermometer is also supplied with your choice of a Red or Blue Silicone rubber boot for that extra protection.

There are 6 versions of the 2700 series to select from, each having its own special capabilities, details on each version can be found under the Technical data tab.

If you are looking for something of higher accuracy as a reference thermometer then check out the GMH 3710 or the GMH 3750 series from Greisinger.

Product code:

Each probe is 2 wire PT 1000. The Probe is permanently connected to the 2700, giving an IP 67 rating, so isolated from water ingress as well as steam proof.
Accuracy for each model is + 0.1 °C plus 1 Digit for the range of -20 °C to + 100 °C. For the range of -70 °C to +200 °C the accuracy is + 0.1 °C of the measured value plus 2 Digits. Resolution across the range is 0.1 °C

GHM 2710-T
This is the general purpose unit for taking measurements in liquids or gases over the range of -199.9 °C to + 200.0 °C, Plastic handle, Probe is 100 mm x 3 mm Diameter. 1 meter PVC Cable.

GMH 2710-E
This is the general purpose unit for taking measurements in liquids or gases over the range of -199.9 °C to + 200.0 °C, Plastic handle, Probe is 100 mm x 3 mm Diameter. 1 meter PVC Cable. Plus needle point insertion tip for insertion into soft media like food or other food products.

GMH 2710-K
Special design with Teflon Handle, 1 Meter Teflon Cable, with slim needle point insertion tip. Cable and handle can handle temperatures up to 250 °C air Temperature. Stainless cable kink protection for that extra cable protection. Measuring range of -199.9 °C to + 250.0 °C . Probe 100 mm x 3 mm Diameter.

GMH 2710-G
Special design with slim Teflon Handle, 1 Meter Teflon Cable, with slim needle point insertion tip. Cable and handle can handle temperatures up to 250 °C air Temperature, Stainless cable kink protection Measuring range of -199.9 °C to + 250.0 °C . Probe 100 mm x 1.5 mm Diameter. Suitable for permanent connection.

GMH 2710-F
Perfect for those hard to reach temperature measurements, i.e. storage of food, incoming inspection and many other difficult applications. Bendable Probe 3mm Diameter x 150mm long. Has a measuring range of -70°C to + 250.0 °C

GMH 2710-I
Bendable Probe 3mm Diameter x 150mm long with needle point insertion tip. Has a measuring range of -70°C to + 250.0 °C,  again perfect for those hard to reach applications.

To protect your 2710 we offer a universal case with protective foam, great for storing your thermometer along with a few other little things.  Saves it getting damaged between your measurements.